Determine the place where you want to apply the wall sticker. The length and width of the sticker are indicated in the webshop. It’s advised to measure the place where you want the wall sticker and to check whether the sticker fits here.
Check whether the chosen location has the correct surface. The Fine Forest wall stickers look their best on white, even surfaces with natural light. Avoid walls with coarse textures. Follow our further instructions for the best result.
Applying the sticker
The wall stickers work best on a smooth, white surface. Avoid damp areas, walls with coarse textures and placement above heaters. You can optionally attach a piece of residual sticker to a discrete piece of surface. This way you can check whether it sticks well and whether you can remove it.
To get the best result it is important that the surface is free from dust and grease. Use a dry cloth with some ammonia if necessary.
Make sure you have a clean and dry kitchen towel ready. Start at the top of the sticker. Peel off the backing paper a little and apply the top part of the sticker on the surface.
Slowly peel off the rest of the backing paper with one hand. With the other hand you stick the decal to the surface, being careful to remove all bubbles. Rub the surface and edges of the sticker firmly with the clean kitchen towel for 1 minute.
When applying an XL wall sticker, it is advisable to apply this with two people.
Not applying the sticker immediately? Store the stickers in a dry and clean place, between 10 ° C and 30 ° C. Make sure the wall stickers are stored flat and are applied within 2 months (the sooner the better).